Wheel Drive Geotechnical Auger Pile Drilling Rig (Lq360-6)

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Year
• Model NO.: Lq360-6 Wheel Drive Auger Pile Drilling Rig
• Type: Drill
• Pressure Pile Driver Type: Mechanical Pile Driver
• Pile Hammer Type: Screw
• Power Source: Diesel
• Motor Power: 33kw
• Noise: With Noise
• Certification: ISO 9001:2008
• Condition: New
• Piling Hole Depth: 6-11m
• Piling Hole Diameter: 100-800mm
• Transport Package: Nuded Cargo
• Specification: 360
• Trademark: LQ
• Origin: Changsha, Hunan, China
• HS Code: 8430490000
• Production Capacity: 10 Sets/Month

Product Description

Product Description

1. Wheeled auger using generators, motors integrated design, in addition to the existing hydraulic power as the driving force, but through the installation of the motor, to achieve a job as a power construction, helping users save expenses to the maximum extent, highlight cheap of the machine.

2. Compared to the small hammers, pile foundations, the spiral piling machine to be better meet the requirements of various large-scale infrastructure construction. This machine is applicable to soil, clay, fill soil, silt, silt layer, and some strata contain pebbles, gravel; Widely used in high-speed rail trestle piles, slop shield piles, photovoltaic power station foundation pile, power grids, civil construction, new rural construction, municipal construction, landscaping and other projects. 
 
3. Flexible: machine tonnage of small, simple operation, move quickly, transitions, easy to move.
 
4. Cost-effective: small acquisition costs, small investment, the effectiveness of large, fast gains.
 
5. Facilitate disassembly: drill, the host of highly integrated, without disassembly, saving time, fuel and electricity dual (optional), to reduce costs.

 

Product Parameters

 

LQ360-6	Item	Unit	Data
vehicle parameters	Dimensions	mm	7300X2100X2850
	minimum gap	mm	230
	wheel track	mm	Front 1860, back 1920
	wheel base	mm	2650
	Upright height	mm	7500
	Telescopic trajectory	mm	800
	total weight	kg	6500
	tyre size	/	Front 700-16, back 750-16
	traveling speed	km/h	40
	Gradeability	°	25
Diesel engine	Model	/	Quanchai 485
	power	kw	34
	Rotary speed	r/min	2200
Generator set	power	kw	50
Hydraulic systerm	Wedge pressure	mpa	16-20
	Outrigger pressure	mpa	16-20
	Max pressure	mpa	20
	Main pump flow	l/min	32
Working range	Piling hole diameter	mm	100-800
	Piling hole depth	m	6-11
	Drill pipe speed	r/min	40-65
	Drill pull force	KN	100
	Rotation angle	°	360
Piling rig performance	1 on the frame and the next frame can be rotated 360 ° , the frame can slide back and forth 80cm., Working without dead ends.  2   high piling speed, an average of 3 minutes into a 6m deep hole.  3 Remote piling can use the remote control, the operation easier.  4 supports two walk way: Hydraulic power walking and walking (with generators).  5 vehicle parts, electrical products are based on well-known manufacturers, quality is guaranteed.

Related Photos