Diesel Engine Wheel Trailer Type Cable Percussion Drilling Rig (CZ-8A)

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: CZ-8A
• Condition: New
• Drill Hole Diameter: 300-2200mm
• Drill Hole Depth: 600m
• Bit Type: Iron Cone
• Drilling Way: Impactor
• Type: Wheel Trailer
• Use: Water Well, Pile Foundation
• Transport Package: Naked Packing
• Specification: -8A
• Trademark: CZ
• Origin: China
• HS Code: 8430412900
• Production Capacity: 20 Sets/Month

Product Description

CZ-8A drilling rig is very popular in the market currently, all of its components are all installed in the trailer,like electric motor,drive motor,hoist,mast etc,integrate motion. The percussion drilling rig uses the crank-link mechanism to change the power's gyration motion into alternating motion ,through the steel wire rope to drive the hammer bit to do up-and-down motion. With the impact effect of the hammer bit's free failing,to break the soil,sand,pebble or rock into pieces,and then use the slag tube or mud pump to clean the slag our of the hole.

Tubular bit has all kinds of diameters, the hole decides the size and weight of the bit. This tubular bit is very efficient in drilling soil,sand,pebble and rock layer whose hardness is less than 1000kp.
  
Solid bit has various shapes, but most of the shapes are cross bits or vertical solid bits.There are all kinds of sizes,the diameter of the hole decides the size and weight of the bit. This solid type bit is hard to break in drilling rock layer whose hardness is more than 1000kp.
  
The drilling way of percussion rig is to break the rocks into granular slag,though it is not as efficient as core drilling rig or screw drilling rig,but it is irreplaceable,for it can operate in the geological layer when other drilling rigs can not.In short,there is no layers that this kind of drilling rig can not drill,the drill speed depends on the hardness of the working stratums.






The technical parameters of the CZ-8A Cable Percussion Drilling Rig:
 

CZ-8A Basic Mechanical Features and Specifications
No.	Mechanical features		Specifications
1	Dimensions(M)		9.30*2.50*3.15
2	Transport dimensions(M)		9.30*2.28*2.85
3	Weight(kg)		10500
4	Drilling diameter(mm)		300-2500
5	Drilling depth(M)		300(when dia. Is 600mm)
6	Max.Weight of drill bit(kg)		7000
7	Impact stroke(mm)		Max.850,Min.700
8	Rate of impact(time/min)		36-40
9	Electric motor		Model YL280M2-6,75KW 980R/Min
10	Height of mast (M)		Single bar8.5-9.5m; Double bar12.5m
11	Load capacity of mast(kg)		50000
12	Hauling speed(km/h)		30
13	Lifting capacity of Hoist(N)	Front hoist	20096
		Back hoist	108750
14	Steel wire rope of coiling block(M)	Front coiling block	6×37-φ18  200-250(Left turning)
		Back coiling block	6×19s+IWRC 200-300(Left turning)
15	Wheel	Tire size	7.50-20
		Steel ring size	20×7